Contact Us

Use the form on the right to contact us. We check it multiple times per day.

Retail Store and Sew Shop

6045 Lake Murray Blvd
La Mesa, CA 91942

(888) 78-WILDE / (888) 789-4533

Next to U.S. Post Office, across the street from Vine Cottage.
 

8606 Argent Street Suite C
Santee, CA 92071

Wilde Custom Gear Tactical Nylon is your one stop shop for custom tactical nylon gear and nylon gear repairs and modifications.  100% Made in San Diego, CA.  Based on over 20 years of law enforcement and military experience.

Our Gear

Plate Carrier with Cummerbund and AR500 Armor Plates

Plate Carrier Cummerbund Ranger Green.jpg
Plate Carrier Cummerbund Ranger Green Side.jpg
Plate Carrier Cummerbund Ranger Green.jpg
Plate Carrier Cummerbund Ranger Green Side.jpg

Plate Carrier with Cummerbund and AR500 Armor Plates

from 299.99

Wilde Custom Gear Tactical Nylon has designed an ultra low profile plate carrier with AR500 Armor Plates.  The package includes our Mil-Spec grade carrier, specifically designed to accommodate the AR500 Advanced Shooter's Cut Low Profile Plates, and two AR500 10" x 12" Advanced Shooter's Cut Plates.  This ultra low profile design is one of the slimmest designs on the market at only 1/4" thick.  A matching MOLLE Cummerbund provides secure closure of the carrier and uses our proprietary rear elastic feature to allow for expansion without over compressing while on the move.

Available Colors:

Black
Coyote Brown
Ranger Green
Multicam with matching Murdock jacquard woven webbing
A-TACS AU Advanced Tactical Concealment System with matching Murdock jacquard woven webbing
A-TACS FG Advanced Tactical Concealment System with matching Murdock jacquard woven webbing
Kryptek Highlander
Kryptek Typhon
 

Additional colors and patterns available by special request.  Contact us for details.

DUE TO HIGH DEMAND, OUR PLATE CARRIER AND AR500 PLATE PACKAGE WILL SHIP APPROXIMATELY TWO WEEKS AFTER ORDERING.  THANK YOU FOR YOUR PATIENCE!

Size:
Color:
Quantity:
Add To Cart

This ultra low profile design is one of the slimmest designs on the market at only 1/4" thick.  A matching MOLLE Cummerbund provides secure closure of the carrier and uses our proprietary rear elastic feature to allow for expansion without over compressing while on the move.
Plate Carrier Features:
Ultra Low Profile Design
1000D Cordura
Adjustable Shoulder Straps
Removable Shoulder Pads
Cummerbund Design with Flap and Rear Elastic
Generous Amounts of MOLLE Webbing on Front and Back
100% American Made in our shop in San Diego
AR500 Armor Features:
AR500 Armor plates are a great alternative to ballistic ceramic or Kevlar alternatives. AR500 Armor plates provide a versatile, durable, multi-hit solution when considering additional protection against high-powered rifle rounds.  AR500 Armor plates require no special handling or maintenance, and are a more economical and long term solution when compared to ballistic ceramic or Kevlar alternatives.
AR500 Armor uses steel that is ballistic rated and specially formulated and designed for armor applications to withstand hard impact and abrasion.  AR500 Body Armor is cut and manufactured from a master of hand-picked Ballistic Grade Armor specifically designed for armored applications with a Brinell rating of 500 or better.
AR500 Trauma Plates are rated at the caliber testing of Level III, are stand alone and multi-hit capable. Level III armor is designed to protect against rifle calibers up to 7.62x51/.308 Winchester at a velocity of 2780 ft/s.  Level III is rated for all lower level calibers such as  .22lr, .380, 9mm, .40 S&W, .45ACP, 10mm, .357 magnum, .357 sig, and .44 magnum.  In addition, AR500 Armor plates have been tested with 12 gauge one ounce slugs and 12 gauge 00 Buckshot.
Recent testing provided good results against Federal XM855/SS109 Penetrator Round (Green Tip 5.56 mm). Tests were conducted with 7 rounds at 15 yards within a 2.5" group and experienced no penetration.
AR500 Armor Trauma Plates do not have a limited shelf life. No special handling or maintenance is required. AR500 Armor is more durable and much less fragile than ceramic when it comes to general handling and storage.  General use and training will not affect the integrity of AR500 Armor.
AR500 Armor plates ships with a Line-X Protective Base Coat which provides a level of spall and fragmentation mitigation properties and superior chemical, wear, water, and harsh condition resistance. Also features a hand applied high traction surface helping the plate stay in position.
AR500 Armor Curved Trauma Plate Advanced Shooters Cut (10” x 12”) provides the perfect balance between coverage and mobility. AR500 Armor maximizes both of these attributes and allows the operator to properly shoulder their rifle in a more comfortable position while providing maximum coverage. 
The AR500 Armor Curved trauma plate features four separate ergonomic bends. The angle of the formed trauma plate is designed to accommodate most body sizes. The curve adds an extra level of comfort for the operator. The form fit is free of sharp edges and is designed to follow the form of your body, and not dig in.
Each AR500 10” x 12” Trauma Plate weighs 7.5 pounds and is 1/4” thick.
Each AR500 11" x 14" Trauma Plate weighs 10 pounds and is 1/4" thick.
All AR500 products are 100% made in USA. 
DUE TO HIGH DEMAND, OUR PLATE CARRIER AND AR500 PLATE PACKAGE WILL SHIP APPROXIMATELY TWO WEEKS AFTER ORDERING.  THANK YOU FOR YOUR PATIENCE!